7 Jan 2015

Dangerous scaffold costs Portsmouth firm owner

The owner of a small construction firm in Portsmouth has been fined after he erected a series of scaffolds in and around the town over several months in late 2013 that were riddled with dangerous faults.

Graham Pedaltey, trading as Graham’s Scaffolds, put workers lives at risk by putting up scaffolds several metres high for them to work on but with potentially lethal defects that could have seen builders fall from unguarded platforms or through rotting wooden planks.

The Health and Safety Executive (HSE) prosecuted Mr Pedalty (6 Jan) at Portsmouth Magistrates’ Court for safety breaches after investigating a particularly hazardous scaffold that he was responsible for in North End Avenue last year. HSE attended as a result of a complaint made by a member of the public.

The court heard that the scaffold, erected on 18 October, had numerous faults:

• It was not tied to the building so was insecure and more liable to collapse
• It lacked baseplates on many uprights, meaning that the scaffold could have sunk into the ground or ‘punched through’ any drains or cavities it was erected on
• There were few, if any, guardrails on the lifts – or working platforms – to prevent falls from height
• There was no bracing on the middle scaffold on the middle working platform giving rise to serious stability issues
• Many of the boards were rotten and damaged and could have broken under workers’ feet, sending them falling to the ground below.

Despite remedial work requested by HSE being carried out on the scaffold by Mr Pedaltey, there were still defects.

The court was told that Mr Pedaltey had received previous advice from HSE on poor scaffolding twice during the previous month of September 2013.

Graham Pedaltey, trading as Graham’s Scaffolds, of Queens Road, Portsmouth, was fined a total of £1,600 and ordered to pay £600 in costs after admitting breaching the Health and Safety at Work etc Act 1974 and the Work at Height Regulations.

After the hearing, HSE inspector Peter Snelgrove said:

“Mr Pedaltey not only erected numerous unsafe scaffolds, but also relied on his knowledge from training delivered in 1979 – more than 30 years earlier. He has now been prohibited from erecting scaffolds until he has completed further training to acquaint himself with up-to-date safety legislation and scaffolding standards.

“His failings created a risk of death or serious personal injury. Scaffolds are temporary structures and their integrity and safety must be ensured to, in turn, safeguard the workers and passers-by.”

Safe Equipment Management

Good to Go Safety are providers of a range of products designed to improve workplace safety and reduce the risk of accidents and the cost of maintenance repairs.

Our innovative ‘Safe Equipment Management System’ (SEMS) can help to achieve a safer working environment by ensuring workers know when equipment has been checked and proven to be safe to use.

It encourages employees to carry out safety inspections on equipment and is the ideal addition to your H&S, maintenance and safety equipment management programmes.

Depending on the type of equipment you may require daily, weekly, monthly or ad-hoc checks to be carried out. Good to Go Safety provides the perfect solution. It is suitable for monitoring all your workplace equipment and supporting the need for regular equipment inspections in line with PUWER (Provision and Use of Work Equipment Regulations) and maintenance / Health & Safety policies.

This equipment management inspection system is available as individual components or in kit format making it a truly flexible system with the versatility to meet all your equipment safety management needs.

Serious accidents are a daily occurrence in the workplace. These accidents are often as a result of inadequate training or equipment misuse. Our inspection system can prevent accidents and help avoid personal injuries.

The Good to Go Safety system is an adaptable equipment checking system, which provides a means for assessing equipment, highlighting any defects and ultimately providing a safer working environment. Offering a simple, effective and affordable solution to equipment safety.

The Good to Go Safety inspection system can be used on a wide range of applications, including fixed scaffolding, forklifts, ladders, vehicles, MEWP’s, pallet trucks and many more.

With unparalleled knowledge, technical expertise and market leading customer service and sales support we’re always happy to help.

For more information click here: www.goodtogosafety.co.uk Call our team on: 01592 655646 or Email us at social@goodtogosafety.co.uk

No comments:

Post a Comment

Powered by Blogger.